| SNC53 Features and Functions |
| 1. For the backing material (X) of the bending machine, the position of the block in the left and right cylinders (Y1, Y2), the lifting position of the rear block (R), the left and right gears (Z1, Z2), the pressure (P) and the deflection compensation (Hydraulic, mechanical) (V) for automatic positioning control. |
| 2. The parameters can be set to single side and bilateral positioning mode, and the single side positioning mode can effectively eliminate the screw drive gap. |
| 3. The system has a soft limit function. |
| 4. Power-off position memory function. |
| 5. The display scale factor can be set according to the screw pitch and the transmission ratio. The display scale factor can be automatically calculated by the numerical control system through the teaching operation function, and the operation is very simple. |
| 6. Single step insert mode, very practical and convenient. |
| 7. Multi-step programming function, can achieve multi-step automatic operation. |
| 8. Retreat the escape function to avoid interference between the back gauge device and the workpiece to reduce wear. |
| 9. Integrated pump start and switch adjustment, single, continuous function in the system. |
| 10. With password protection. |
| 11. Large arc programming function. |
| 12. IO port flexible configuration and valve group configuration function. |
| 13. The raster real-time feedback slider position. |