What is the structure of press brake?

Press brakes represent a wealth of experience and pioneering innovation. Press brakes can combine with other machines for die and panel bending technologies. There is a wide range of options available for each bending technology to suit specific application. Use press brake to produce simple and complex parts in any format precisely and cost-effectively.

• What is the structure of press brake?

• What are the structural features of press brake?

• What should you know about the supporting wheel frame of press brake?

What is the structure of press brake?

The structure of press brake mainly includes a bracket, a working table and a clamping plate. The working table composed of a base and a pressing plate is placed on the bracket. The base containing a seat shell, a coil and a cover plate is connected with a hinge and a clamping plate. The coil is placed in the recess of the seat shell. The top of the recess is covered with a cover plate.

Slider part of press brake uses hydraulic transmission. It is composed of sliding block, oil cylinder and mechanical fine-tuning stopper. The left and right oil cylinders are fixed on the frame. The piston drives the slider to move up and down by hydraulic pressure.

The workbench part of press brake is operated by the button box. The motor drives the stopper to move back and forth.

The synchronization system of press brake is composed of a torsion shaft, swing arm, joint bearing and other mechanical synchronization mechanisms. It has a simple structure, stable and reliable performance, high synchronization accuracy. The mechanical stop is adjusted by the motor.

The gauge mechanism of press brake is driven by a motor. The two screw rods are driven to move synchronously through the chain operation.

What are the structural features of press brake?

1. Press brake adopts all-steel and single-welded structure.

2. Press brake uses hydraulic transmission. The end cylinder of the press brake is selected on the upper, which directly drives the mobile work.

3. Press brake has multiple synchronization mechanisms adopting torsion shaft synchronization.

4. Press brake uses mechanical block structure, which is stable and reliable.

5. Press brake uses manual fine-tuning, clicking to display.

6. Oblique three-dimensional deflection compensation mechanism of press brake ensures the reduction of bending accuracy.

What should you know about the supporting wheel frame of press brake?

The press brake needs to change molds according to different products. The supporting wheel frame of press brake needs to adjust the height of the supporting material. There are problems of troublesome operation and low efficiency in the processing. By optimizing the design of the supporting wheel frame of the press brake, the goal of adjusting the height and length by rotating the lead screw is realized. It is an indispensable part of the press brake, which mainly plays the role of feeding and pushing materials.

The support roller frame is composed of 45 round steel rollers, which are set on the top and are higher than the support beams on both sides. The sheet material pushing is light and fast.

The bracket mainly plays the role of supporting the placement of the plates. It is considered to be able to place more than 10 plates at the same time and have sufficient strength. The rectangular tube frame structure can reduce the deformation of long-term high-load operations.

Traveling wheel is connected with the ground guide rails by rollers. The guide rails are set to ensure that the support roller frame walks along a straight line that is parallel to the press brake.

Learn more about press brake can know the structure of press brake and the structural features of press brake. LZK CNC Machine Tool(Anhui) Manufacturing Co., Ltd. is a powerful manufacturer in China. it is wise of you to cooperate with us.